How to replace your car’s powder coat wheels
Posted On July 26, 2021
The dust-cleaning process used to coat your wheels after a major winter storm can be difficult, but it’s not without benefits.
For the most part, powder coating is easy to do and requires only a few ingredients.
Here’s how to replace the old wheels and the new wheels you’re stuck with.
Find a source of powder coating powder 2.
Remove the old powder coating wheels with a small metal scraper or tool3.
Pour a thin coat of the new powder coating on the old wheel4.
Seal the old coat with the new wheel, then use a plastic scraper to scrape off the old coating.
It takes some time to completely remove the old layer of powder coat, so you may need to wait a while for the powder coating to fully dry before you can replace the wheels.
The new powder coat may need a few hours to completely dry, so it may be necessary to wait several days.
If you’re using a plastic wheel scraper, be sure to clean it with a soft, damp cloth.
If it’s really hard to remove the powder coat from your wheels, try using a metal scrapper or some other tool to remove it.
After your powder coat has dried, you can remove it by wiping it off with a cloth and then wiping it with another cloth to remove any remaining dust or debris.
If you are using a rotary wheel, be aware that you may have to wait longer for the new coating to completely cure.
If this is the case, be careful to avoid any contact with your wheel.
You may need more time to thoroughly remove the new coat than for the old one, so be sure you follow the directions on your wheel’s manufacturer’s instructions.
Once you have the powder coated wheels back, it’s time to remove them.
If you’re still stuck with them, you may be able to remove some of the powder and put it in a bucket or bag.